Award-winning pedestrian and cycle bridge – designed to make Cork a more sustainable, accessible and

commuter-friendly city

Digital collaboration for timely delivery

Close collaboration with architects WilkinsonEyre helped bring to life this unique city link concept. With the architectural vision at the heart of the design process, Arup used modelling techniques to optimise the geometry of the bridge and deliver the most efficient shape to minimise the amount of steel required. The main structure is made of high-grade painted structural steel, with polished stainless steel used for the parapet handrails, enabling a strong visual connection with the River Lee.

Using Arup’s proprietary GSA software, our engineers assessed the dynamic performance of the bridge, including pedestrian footfall and wind vibration to optimise the plate thickness. Using analysis software Sofistik, Arup modelled all stages of construction, ensuring that the bridge’s deflected shape during lifting could be estimated to fit within the allowed 35mm tolerance at each end.

The 3D models of this lightweight structure were parametrically generated using a combination of Dynamo and Revit which allowed for virtual design reviews, ensuring full alignment and coordination throughout the project. As the project supervisor for the design process (PSDP), Arup coordinated the health and safety matters relating to the work of the designers throughout the design stage.

The final model was shared with the fabrication contractor, ensuring that the bridge was constructed to the required geometry and tolerance.

A trusted advisor to Cork City Council

This crucial new piece of urban infrastructure was funded by Ireland’s National Transport Authority and a grant from the European Regional Development Fund (ERDF), so tight delivery timelines were a major driver: our consultants helped navigate the entire statutory approval process without a glitch.

Arup’s environmental and planning consultants advised on all aspects of the process, including successfully achieving a Section 50 application for constructing over a watercourse. Our water engineers also produced a full 3D flood model, showing that the bridge would not adversely affect the hydraulic capacity of the river.

Responsive lighting system highlights bridge’s structural elegance 

Complemented by lighting, the bridge’s simple structural form has created a functional, beautiful attraction within the city. The lighting design showcases the bridge’s slender arch with tubular feature lighting below the deck that illuminates the spine beam and decking as well as energy efficient LED fittings embedded into the handrails.

Set on a dimmer panel, the lighting system is controlled by ambient sensors with an astronomical clock, ensuring that the lighting levels on the bridge are responsive to ambient light and seasonal variations in daylight.

Constructability: a key consideration from the outset

Deciding on the construction sequence was an important element of the concept design. Since the bridge had to travel beneath two existing bridges before being lifted into place, the design was developed with constructability and transportation in mind. The bridge was fabricated offsite by Thompsons of Carlow in nine sections before assembling it at Doyle’s Shipping Yard in Cobh, downriver from its eventual home.

The semi-elliptical arched bridge was transported on a custom-made barge, with the ends of the bridge submerged to ensure maximum clearance to both the underside of the existing bridges and the river bed.

In May 2019, the impressive structure was lifted by 500 tonne and 750 tonne cranes, operated by East Cork Crane Hire Ltd. onto the barge. It travelled up the river and was lifted by the same cranes using a tandem lift of 160 tonne and lowered into place across the north channel of the Lee.